3.Before juicing, first confirm juicing net and rotor clutched i n position,
and no hard contact between juicing net cutter and transparent
cover . Put the transparent cover on, fasten tight the handle, then
turn on the machine.
4.Before being used, the motor works in running-in phase, there
may be slight peculiar smell and spark, this is normal, after the
mot or works for some period, the above phenomenon will
disappear .
5.During juicing, make sure there is not too full juice and residue
in the middle seat and residue cup, if too full, please cut off power
supply , clean up, then use again.
6.During using, do not open the cup cover. In case power supply
is on, do not put hand or any ware into the mixing cup or feed
port, otherwise, harmful accident may occur or this machine may
be damaged.
7.In order to prolong service life of this machine, over-temperature
protective device is mounted in the motor. If the motor works for
a long time or overloaded, when over warning temperature,power
supply will automatically cut off. After the motor stops, pull out
plug of power supply , wait for the motor to cool (about for 30
min), use again.
8.During operating, please do not leave, never let children operate