Espresso maker R-988
EN
6
coffee button and steam button flash, the machine begins preheating, after all
indicators are solidly on, the preheating is completed
Note: if preheating is not completed yet, press 1-cup coffee button, 2-cup
coffee button or manual coffee button, the pump does not work;if you want to
make steam,press the steam button.
5.
Press Manual coffee button, the unit will pump water for about 30s, pour out
water in the cup then clean them thoroughly, now the appliance is ready for
making coffee.
Note: There may be noise when pumping water for the first time, it is normal
that the appliance is releasing the air inside. After about 20s, the noise will
disappear.
Note: Before the first use, because there is no water in the boiler,the button
indicator will flash to alarm quickly.Press the button of the free cup until the
pump stops working and the product stops to alarm,and the coffee brewing
operation can be started.Place the electric kettle well back from the edge of
the counter.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you should preheat the
appliance before making coffee, including metal funnel, steel mesh and cup, so that
the coffee flavour can not be influenced by cold parts.
1.
Remove detachable water tank and open water tank cover to fill it with desired
water, the water level should not exceed the “MAX” mark in the tank. Then
replace water tank
2.
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the
“INSERT” position, and fix them into coffee maker firmly by turning it
anticlockwise
until it is at the “LOCK” position.
