29/55
© 2022 ROHM Co., Ltd.
No. 64UG118E Rev.002
Feb.2022
User’s Guide
Figure 49. Angle Calibration Completed. Back to Position 1
Figure 50. Calibration Done notification window
At this point, if the user is satisfied with the calibration parameters, they can be saved to an individual .json file that can be loaded next time the
ROHM EVK GUI SW restarts. These calibration parameters will now be used for angle calculations.
The plotter view now shows the Accelerometer (X, Y, Z) acceleration data stream as well as the angle stream. The default units for angle values
are radians. To display the angle information in degrees, click on the Raw data button located above the plotter view (
Figure 51. Plotter view with KX132-1211 inclinometer stream
