11/55
© 2022 ROHM Co., Ltd.
No. 64UG118E Rev.002
Feb.2022
User’s Guide
1.3.2.2
Logging
The logging menu is used for enabling / disabling device data logging. When logging is enabled, then “logging to” text is blinking on the right corner
of the status bar (Figure 14).
NOTE:
It is normal to see a variation in the time intervals. Data is received at varying intervals and timestamps are given by the ROHM EVK GUI
SW.
Figure 14. Status bar text when logging is active.
1.3.3
Connection – Menu
The ROHM EVK GUI SW connects to the RKX-EVK-001 via a USB COM port. The Bluetooth connection (Windows BLE) is reserved for other
host platforms supported by the ROHM EVK. The ROHM EVK GUI SW uses USB COM connection by default. When auto-connect is enabled,
the USB connection is established automatically when the RKX-EVK-001 is connected.
Figure 15. Connection Menu
NOTE:
Changing connection may take a while, please be patient.
NOTE:
If you are having connection problems, “CTRL + R” can be used to refresh current connection.
1.3.4
Registers - Menu
The Registers menu contains the functionality related to register editor and how values in the register editor are load/save from/to file or read/write
from/to the connected device.
NOTE:
Register editor view can be found in (
Figure 16. Registers Menu
