Rohm Lapis Technology RB-D610Q327TB48, User Manual

Page: 11 / 13

RB-D610Q327TB48 User ’ s Manual
FEBL610Q327RB
8
6.2. BOM list
Table 4 BOM list
Parts Number Symbol Contents Qty. Vendor
1 QTU-11950 RB-D610Q327TB48 PWB 1 LAPIS Technology Co., Ltd.
2 C1608X7R1E105K080AB C1,C2,C3,C4 Ceramic Capacitor 1uF/25V X7R 4 TDK
3 - C5,C6,C7,C8 Unmounted 4 -
4 - CN1,CN2 Unmounted 2 -
5 HIF3FC-14PA-2.54DSA CNE 14pin Header 1 HIROSE
6 MJ-354A0 JACK Monaural Speaker Jack 1 MARUSHIN
7 SML-M13UT LED1,LED2,LED3 LED Red 3 ROHM
8 MCR03EZPJ561 R1,R2,R3 Resistor 560Ω ±5% 3 ROHM
9 MCR03EZRJ000 R4,R5,R6 Resistor 0Ω 3 ROHM
10 MCR03EZPJ102 R7,R8,R9,R10 Resistor 1kΩ ±5% 4 ROHM
11 A2-3PA-2.54DSA(71) J1,J2,J3 3pin Header 3 HIROSE
12 HIF-3GA-2.54SP - Jumper Socket 3 HIROSE
13 - TP1,TP2,TP3,TP4,TP5,TP6 Unmounted 6 -
14 - AIN4,AIN5,AIN6,AIN7 Unmounted 4 -
15 ML610Q327-NNNTB U1 MCU 1 LAPIS Technology Co., Ltd.
16 FF013-P3555-AR791 - Rubber leg, Push rivet 4 KOYO FASTENER
[Note]
-
The diameter of through hole of CN1 and CN2 is 0.8mm.
Using CN1 and CN2, the diameter of connector pin should use the connector below 0.8mm, such as 0.5mm.
-
The parts may be changed into another parts with equivalent part special quality.
6.3. Schematic
The schematic of RB-D610Q327TB48 is shown below.