Rohm Lapis EASE1000 V2, User Manual

Page: 8 / 33

EASE1000 V2 User’s Manual
Be sure to read this page before using this product.
Note
● Do not apply a voltage exceeding the 5.5V to the VTref pin of the EASE1000 V2
Interface cable. It might cause fire, electric shock or failure.
● The order of power ON and OFF needs extra attention. Incorrect order might cause
fire, electric shock or failure.
● Be sure to turn off the EASE1000 V2 and the user application system before
connecting or disconnecting them. Otherwise, it might cause fire, electric shock or
failure.
● The EASE1000 V2 is an unfinished product and intended for research and development and for
expert use in the research and development facility only.
The EASE1000 V2 is not intended for use for volume production or parts thereof.
● Do not use the EASE1000 V2 for the final check of target LSI of operation.
● The guarantee period to the initial failure of EASE1000 V2 is one year.
The obstacle by the wrong usage and reconstruction etc. cannot be guarantee.
● The content specified herein is subject to change for improvement without notice.
Therefore, when using the EASE1000 V2, the contents of the manual should check in the newest.
7