Rohm Lapis EASE1000 V2, User Manual

Page: 21 / 33

EASE1000 V2 User’s Manual
3 START
3.1 Starting EASE1000 V2
This section describes how to start EASE1000 V2.
For the following software running on the host PC, see the appropriate user's manual.
- DTU8 User's Manual
- MWU16 Flash Multi Writer Host Program User's Manual
3.1.1 Starting Procedure
Start EASE1000 V2 according to the following procedure.
(1) Connect EASE1000 V2 with the target system through the supplied EASE1000 V2 interface cable.
(2) Connect EASE1000 V2 with the host PC though the supplied USB cable.
EASE1000 V2 is USB bus-powered. When the USB cable is connected to EASE1000 V2, EASE1000 V2 is
turned on, and the POWER indicator on EASE1000 V2 lights up in green.
(3) Turn on the target system.
(4) Start the software on the host PC.
Target system
Host PC
Target LSI
EASE1000 V2 interface cable
USB cable
EASE1000 V2
・
DTU8 Debugger
・
MWU16 Flash Multi Writer
host program
Figure 3-1 EASE1000 V2 System Diagram
Note
Be sure to start according to the starting procedure.
Failing to obey the procedure may cause fire, electric shock or failure.
Note
Be sure to use the cables attached to EASE1000 V2.
Using different cables may cause fire, electric shock or failure.
20