4 | Transport
20 / 44
KZS-H_KZS-HG
3.2.3
Permissible Operating Materials
The following operating materials are permitted for use on the centric clamp:
▪ Röhm grease F80, lubrication grease for moving parts
▪ Screw-lock lacquer, low or medium strength
▪ With central lubrication: lubrication oil G CLP DIN 51517-3:2014-02, vis-
cosity class VG 68 DIN ISO 3448:2010-02, max. permissible temperature
70 °C
▪ Hydraulic oil, HLP 32 (at 40 °C) pursuant to DIN 51524-2:2017-06
▪ Hydraulic oil, HLP 46 (at 40 °C) pursuant to DIN 51524-2:2017-06
Contamination of the hydraulic fluid by solid particles must not be greater than
according to ISO 4406:2017, number key 20:18:15.
Other hydraulic oil types and viscosities may be possible by arrangement with
RÖHM GmbH.
4
Transport
WARNING
Falling of the centric clamp.
Crushing injuries in the event of unsecured transport of the centric
clamp.
Ø
Use suitable hoisting gear and slings.
Ø
Wear personal protective equipment.
Ø
Do not remain under suspended loads.
4.1
Personal Protective Equipment and Personnel Qualification
When working on and with the centric clamp KZS-H/KZS-HG, personal pro-
tective equipment must be worn. The owner is responsible for providing per-
sonal protective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During
rotational operation
of the centric clamp KZS-H/KZS-HG,
no
pro-
tective gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the centric clamp
KZS-H/KZS-HG is at a standstill.
Summary of Contents for KZS-H
Page 2: ......
