Maintenance | 7
DURO-A RC
39 / 48
Incorrect
Correct
Clamping Ø too small
Clamping on largest possible
clamping Ø
Workpieces with cast iron or forged
tapers
Clamping with self-seating inserts
7
Maintenance
7.1
Personal Protective Equipment and Personnel Qualification
When working on and with the power chuck DURO-A RC, personal protective
equipment must be worn. The owner is responsible for providing personal pro-
tective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During
rotational operation
of the power chuck DURO-A RC,
no
protect-
ive gloves are to be worn! Hand protection is only to be worn during trans-
port, assembly and maintenance and as long as the power chuck
DURO-A RC is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the power chuck may only be carried out by qualified oper-
ating and specialist personnel (see
Qualification of Operating and Special-
).
