ROHM USB Type-C Power Delivery
Evaluation Board Manual
BM92A56MWV-EVK-001 Ver.1.00
6/8
ROHM Co.,Ltd.
URL http://www.rohm.com
Power Delivery Operating Waveform
When connecting this board (Source side) and power receiving device (Sink side) using
Type-C dedicated cable, the Source side detects the Sink side and outputs 5V voltage to the
VBUS pin. After outputting 5V voltage on the Source side, it communicates with the Type-C
controller IC in the dedicated cable to acquire cable information.
After communicating with the cable on the Source side, the Source side transmits its own
power profile information to the Sink side. (Source Capability)
The Sink side requests an appropriate voltage from the power profile to the Source side.
(Request)
In response to the Sink side voltage request, if the Source side is able to deal with it, notifies
the Sink side that it acknowledged. (Accept)
The Source side outputs the requested voltage to the VBUS pin.
After outputting the required voltage, the Source side notifies the Sink side that the
requested voltage has been output. (PS_RDY)
After confirming the requested voltage, the Sink side turns on the FET switch on the VBUS
line.
・
20V negotiation waveform
(
Board VSVR voltage:20V
)
VBUS
CC1
CC2
Plug insert
VBUS output
From Source side
Scale up
Source
Capability
Request
Accept
PS_RDY
BMC negotiation
E-marked
Cable Detect
5V
20V
VBUS
CC1
CC2
Figure6
.
Power Delivery
negotiation
waveform
