12
/13
© 2021 ROHM Co., Ltd.
No. 63UG134E Rev.001
February.2021
User’s Guide
BD63800MUF-EVK-001
4.2
Software
BD63800MUF-EVK-001 can be controlled by SPI commands and the external setting pins. BD63800MUF-C GUI (Graphical User
Interface) software is enabled to set command and read status register easily. Followings are the setting parameter examples on the
software. For detail of the software manual, receiving software, please contact to your ROHM sales office or use the general ROHM
customer support system.
Software Setting items:
⚫
Drive mode selection
➢
Motor Enable / disable
➢
Motor Rotation Direction [Clockwise / Counterclockwise]
➢
Driving / Hold mode
➢
Operation on under voltage state [Open / Hold]
➢
CLK-IN / SPI-IN mode
⚫
Drive and protection parameter
➢
Excitation mode
➢
Peak motor current
➢
Slew rate
➢
Clock speed for SPI-IN mode
➢
Protection parameter (UVLO, TSD, Stall)
