www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
The Hot Water Dispenser Collection
2
Installation & User Guide
Congratulations on the purchace pf your
ROHL
product. Correctly installed and with sensible care, this product
will give you many years of trouble free service.
IMPORTANT INFORMATION
Before you proceed... We recommend you engage the services of a registered plumber / builder to
install this product.
Ensure you also read and understand the instruction manual that accompanies your Perrin and Rowe
heater tank unit.
To avoid perminent damage to the heater tank it is important not to plug the unit until indicated in
heater tank installation manual. Only operate the tank after it is filled with water.
In addition to the guide below it is essential that the written information is carefully read and
understood.
Preparation Check Box for Installer
Flush the plumbing system before installing
the kitchen product
Once unpacked, remove nut and clamping
plate ready for installation.
1.
Unpack the hot water dispenser on a firm
flat surface.
2.
Carefully straighten the tubing from the
bottom of the dispenser.
3.
Ensure the base ring and the O seal are
in place.
Attach to the tank inlet
Attach silicone tube using the clip
Mains water inlet from filter if aplicate