Rohl GKIT1655 Manual Download Page 15

www.rohlhome.com

Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

INSTALLATION INSTRUCTIONS

MAINTENANCE AND CARE INSTRUCTIONS CONTINUED 

Flushing the Instant Hot Water Tank 

It is recommended that the user flushes through the system completely by drawing off 
the instant hot water and allowing to reheat and repeating the process for a further 2 or 3 
times to ensure the system is fully operational. 

Water Draw Back and Contamination in the Tank 

During the filling of any vessel the user must ensure at all times that the spout outlet is 
not submerged in the water during the dispensing of the instant hot water and especially 
when the instant hot water handle is released.

 

 

Maintenance & Power Saving 

If the electronic instant hot water appliance is not being used for long periods of time ie: 
over 2 days, to save power we recommend you switch off using the  “ON/OFF” switch.  

Seasonal Shutdown 

The hot water system (tank and Dispenser) must not be exposed to freezing tempera-
tures. If there is a possibility of this the system must be drained of water. Shut-off the 
mains supply and unplug the unit from the electricity mains and allow the tank to cool for 
at least 1 hour. Disconnect the inlet supply to the tank and remove the silicone hose out-
let pipe, lift the unit to the sink, turn upside down and drain all the water from the tank. 
When re-installing follow the original installation instructions. 
 

The electronic instant hot water appliance like any water heater has a limited operational 
life span and will eventually fail. In order to ensure maximum protection and to avoid possi-
ble damage to any property or personal injury the electronic instant hot water appliance 
should be inspected regularly for any water leakage or damage.  

Regularly check for any signs of water leakage, if there is any water leakage then replace any 
loose or split silicon tubes or flexi tails which can cause water leakage and damage. 

To provide additional water security to avoid property damage the electronic instant hot 
water appliance can be placed in a drain pan and connected to a suitable drain outlet to 
avoid any water damage. The drain pan should be installed using the manufacturers installa-
tion instructions.  

NOTICE  

Summary of Contents for GKIT1655





















Reviews: