Rohde & Schwarz TS7124AS, Instruction Handbook Manual

Page: 17 / 69

Machine Overview
R&S
®
TS7124AS
17 Instructions Handbook 1179.2948.02 ─ 01
4 Machine Overview
This chapter describes all components of the chamber. Function and use of these com-
ponents is described in
Chapter 7, "Operation" , on page 42.
Accessories for the chamber are described in the Configuration Manual .
● Front Tour ................................................................................................................17
● Rear Tour ................................................................................................................ 19
● Push-Button Switch Unit ......................................................................................... 20
4.1 Front Tour
Figure 4-1: Front view of the opened chamber
1 = Door (sometimes called drawer) for DUT exchange
2 = Two grooves filled with elastic RF gasket for sealing the chamber's door
3 = Pneumatic cylinder
4 = Guide rail of the door
5 = Handles for carrying the chamber, see
Chapter 5.1, "Lifting and Carrying" , on page 21
You can open the door (1) to place a DUT in the chamber. Version 1525.8587.12 of the
chamber (shown here) has a door with two centered openings that can be equipped
with optional feedthroughs towards the DUT inside the chamber. Only an
expert user is
allowed to mount, unmount or exchange feedthroughs.
Two pneumatic cylinders (labeled 3, one on each side) open and close the door, with
two guide rails (4) providing stability.
Front Tour