Remote Control Commands
TETRA Release 2
51
Operating Manual 1173.0843.12 ─ 11
Parameters:
<Data>
PATTern | PN11 | PN15 | PN16 | PN20 | PN21 | PN23 | DLISt |
ALL0 | ALL1 | PN09
ALL0|ALL1|
Internal 0 or 1 data is used.
PATT
Internal data is used. The bit pattern for the data is defined with
the aid of command
SCONfiguration:TMODe<di>:SLOT<st>:
LDIRection<ch>:DATA:DPATtern
PNxx
The pseudo-random sequence generator is used as the data
source. There is a choice of different lengths of random
sequence.
DLISt
A data list is used. The data list is selected with the aid of com-
mand
[:SOURce<hw>]:BB:TETRa:SCONfiguration:
TMODe<di>:SLOT<st>:LDIRection<ch>:DATA:
DSELection
*RST:
PN09
Example:
BB:TETR:SCON:TMOD1:SLOT2:LDIR1:DATA PN23
Manual operation:
See
[:SOURce<hw>]:BB:TETRa:SCONfiguration:TMODe<di>:SLOT<st>:
LDIRection<ch>:DATA:DPATtern
<DPattern>
Selects the data pattern with a maximum length of 64 bits for the internal data when
PATTern is selected as the data source (
SCONfiguration:TMODe<di>:SLOT<st>:LDIRection<ch>:DATA
Parameters:
<DPattern>
64 bits
*RST:
#H0,1
Example:
BB:TETR:SCON:TMOD1:SLOT2:LDIR1:DATA PATT
BB:TETR:SCON:TMOD1:SLOT2:LDIR1:DATA:DPAT #H3F,8
Manual operation:
See
[:SOURce<hw>]:BB:TETRa:SCONfiguration:TMODe<di>:SLOT<st>:
LDIRection<ch>:DATA:DSELection
<DSelection>
Selects a data list. This command is only valid for bursts with DATA fields. This data
list is only used if it is set as the data source with the aid of command
SOURce<hw>]:BB:TETRa:SCONfiguration:TMODe<di>:SLOT<st>:
LDIRection<ch>:DATA
Slot Configuration Settings