Rohde & Schwarz SMM100A, User Manual

Page: 899 / 1088

Remote control commands
R&S
®
SMM100A
899 User Manual 1179.1341.02 ─ 05
The following functions cannot be activated simultaneously. They deactivate each
other .
●
The internal baseband generator (
[:SOURce<hw>]:BB:<DigStd>:STATe
) and
the external digital baseband input (
[:SOURce<hw>]:BBIN:STATe
)
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
0
Example: SOURce:IQ:OUTPut:ANALog:STATe ON
Activates the output of the analog I/Q signal on the [I/Q Out 1]
connectors.
Manual operation: See "State" on page 478
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:PRESet
Sets the default settings (
*RST
values specified for the commands).
Not affected are:
●
The state set with the command
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe
.
●
If
SCONfiguration:EXTernal:PBEHaviour 1
, the I/Q ouptput type set with
the command
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE
.
Example: See Example "Enabling and configuring the analog output"
on page 898.
Usage: Event
Manual operation: See "Set to Default" on page 478
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:CATalog?
Queries the files with I/Q output settings in the default directory. Listed are files with the
file extension
*.iqout
.
Return values:
<Catalog> string
Usage: Query only
Manual operation: See "Save/Recall" on page 479
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (
*.iqout
) is
assigned automatically.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
SOURce subsystem