Rohde & Schwarz SMM100A, User Manual

Page: 605 / 1088

Network operation and remote control
R&S
®
SMM100A
605 User Manual 1179.1341.02 ─ 05
The "Instrument Emulations" dialog enables you to emulate a remote control com-
mand set of another signal generator.
The remote commands required to configure the emulation settings remotely are
described in
Chapter 13.17, "SYSTem subsystem" , on page 960.
Language
Selects the instrument whose remote command set is emulated by the
R&S
SMM100A.
Remote command:
:SYSTem:LANGuage
on page 978
Mode
Selects the way the instrument identification is performed.
"Automatic" Sets the "IDN String" and the "OPT String" automatically for the
instrument selected with the parameter
Language .
"User Defined" Enables you to define the "IDN String" and the "OPT String".
Remote command:
:SYSTem:IDENtification
on page 977
Set to Default
In "Mode > User Defined", resets the
*IDN
and
*OPT
strings.
Remote command:
:SYSTem:IDENtification:PRESet
on page 977
IDN String
Indicates the identification string of the instrument when queried with the common
command
*IDN?
.
In addition to the preset values, you can define your own identification string so that
each generator uses an individual identification, like
My_SigGen
for instance, see
Mode .
Remote command:
*IDN?
on page 655
:SYSTem:IRESponse
on page 977
OPT String
Indicates the option string of the instrument as queried with common command
*OPT?
.
In Mode > "User Defined", you can define your own option string. A query responds
with this option string instead of the automatically created option string.
Remote command:
*OPT?
on page 656
:SYSTem:ORESponse
on page 978
Remote access settings