User Manual
PBX-6
PORTABLE BATTERY SPEAKER
Specifications:
Power: 7W
Frequency Response
for main speaker: 75Hz-20KHz
Power Supply: DC 5V
3
Control Panel Function
DC-5V
LINE IN
TF
USB
MIC
VOLUME
LIGHT
POWER
EQ
INPUT
1 2
3
5
4
6
7
9
8
10 11 12
1.DC interface (5V)
2.Line Input
3.TF JACK
4.USB JACK
5.MIC IN JACK
6.Volume Adjustor
7.Power/Input (Hold for 3 seconds to
switch on/off the unit and mode selection
for Bluetooth,FM Radio,Line Input,USB)
8.Light (Light mode selection & switch on/
off button)
9.EQ button
10.Previous track
11.Play/Pause (In FM mode,hold for 3
seconds the device will enter into automatic
12.Next track
(4)
Press to enter into FM radio mode, press SCAN to enter into radio program
automatic scan. Press for radio program manual scan, Top and bottom
trimming, Turn the TUNER button radio station can be adjusted. Slide around to
adjust radio frequency between 87.5MHz~108.0MHz.
(5) Bluetooth connection
Press to enter into Bluetooth Control connection page, then click "Speaker
Pro BLE" to connect to the speaker.
(6)Line In input - mute
Press to enter into Line IN input page, press to mute music, press
insert a line continue play. Press "Back" to main page.
(7) Equalizer regulation
Press to enter the Sound Set page to adjust the music and microphone volume.
Press MUSIC to adjust the volume, bass and treble. There are 4 pre-set EQ modes to
choose from: Pop, Classical, Jazz or Rock. You can also press G-EQ to access the
graphic equalizer to set up your preferred equalizer specification.
FM Radio
7
6
5
4
