Rohde & Schwarz SMM100A, User Manual

Page: 519 / 1088

File and data management
R&S
®
SMM100A
519 User Manual 1179.1341.02 ─ 05
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>
, where
Y
,
M
and
D
mean
year, month, Day;
Number
is the Current Auto Number .
You can activate or deactivate each component separately.
The "Resulting filename" indicates the current filename syntax.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix
on page 695
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe
on page 695
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe
on page 694
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe
on page 694
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe
on page 694
Current Auto Number ← Hardcopy Options > Automatic Naming
Indicates the number which is used in the automatically generated filename.
Note: When initially switching on the instrument, the number is reset to the lowest pos-
sible value. Starting with number 0 the output directory is scanned for existing files. As
long as files with the same name are existing, the number is increased by 1. The num-
ber is automatically set so that the resulting filename is unique within the selected path.
The current number is not in the save/recall file but is temporarily stored within the
database. At the following save operation, the number is increased.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
on page 694
10.10.2 How to save a hardcopy of the display
1. Select "System Config > Setup > User Interface > Hardcopy".
Creating screenshots of current settings