Rohde & Schwarz SGT100A, Getting Started

Page: 27 / 67

Preparing for use
R&S
®
SGT100A
27 Getting Started 1419.4576.02 ─ 10
Start the version that is required for your application.
Uninstalling an old software version
You can uninstall a previous version of the software before the installing a new
software version, but this step is not mandatory.
1. To uninstall this version, go to "Start > Settings > Control Panel > Add/
Remove Programs".
2. Select the entry
SGMA-GUI_V.VV.VVV.VV
.
The script file identifies and removes all currently installed R&S SGMA-GUI
software items.
4.13.2 Connecting a remote PC via LAN
The R&S SGT is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). The interface can be used, for example:
●
To connect an external computer for manual control of the instrument by the
R&S SGMA-GUI software.
●
To operate the device by a remote control program.
See
Chapter 7.2, "Network operation and remote control" , on page 53.
This section describes how to configure the LAN interface. It covers the following
topics:
● Connecting to the network .............................................................................. 27
● Assigning the IP address ................................................................................ 29
● Adding instruments to R&S SGMA-GUI ..........................................................30
4.13.2.1 Connecting to the network
There are two methods to establish a LAN connection to the instrument:
Connecting an external PC and devices