Rohde & Schwarz R&S UPP, User Manual

Page: 731 / 938

Remote Control - Command Description
R&S
®
UPP
715 User Manual 1411.1055.32 ─ 10
SOURce:SCHSettings:CHANnel <channel>
Parameters:
<channel> integer
Manual operation: See "Channel" on page 273
SOURce:SCHSettings:TTOChannels <ttochannels>
Parameters:
<ttochannels> ON | OFF
Manual operation: See "Track to other channels" on page 273
7.3.4 Digital Audio Protocol Generator
The Digital Audio Protocol Generator requires option R&S UPP-K21.
The Digital Audio Protocol Generator requires one of the options R&S UPP-B2 (Digital
audio interfaces) or R&S UPP-B4 (HDMI and digital audio interfaces) and in any case
oOption R&S UPP-K21 (Digital audio protocol) (see Chapter 5.8, "Protocol Generator" ,
on page 280) .
●
SOURce:PROTocol:AZERo
on page 715
●
SOURce:PROTocol:CH<n3>:BYTE<n4>
on page 715
●
SOURce:PROTocol:CRC
on page 716
●
SOURce:PROTocol:FILE
on page 716
●
SOURce:PROTocol:MODE
on page 716
●
SOURce:PROTocol:NUMerical:BYTE
on page 716
●
SOURce:PROTocol:NUMerical:CH
on page 716
●
SOURce:PROTocol:NUMerical:VALue
on page 716
●
SOURce:PROTocol:VALidity
on page 717
SOURce:PROTocol:AZERo <state>
Parameters:
<state> ONCE | EXEC
Manual operation: See "All Bits = Zero" on page 282
SOURce:PROTocol:CH<n3>:BYTE<n4> <byte>
This command combines the following two commands in one :
●
SOURce:PROTocol:NUMerical:BYTE
on page 716
●
SOURce:PROTocol:NUMerical:VALue
on page 716
Suffix:
<n3>
.
channel 1 or 2
Generator Settings