Rohde & Schwarz R&S NRP110TWG, Getting Started

Page: 30 / 50

Operating Concepts
R&S
®
NRP Series
28 Getting Started 1419.0170.02 ─ 10
Supported operating systems:
●
Microsoft Windows versions
–
Microsoft Windows Vista 32/64-bit
– Microsoft Windows 7 32/64-bit
– Microsoft Windows 8/ 8.1 32/64-bit
– Microsoft Windows 10 32/64-bit
●
For information on other operating systems, see Chapter 6.1.1, "Versions and
Downloads" , on page 27.
6.1.3 R&S NRP Toolkit for Windows
The R&S NRP Toolkit installer for Windows-based systems contains the components
described in the release notes available at
www.rohde-schwarz.com/software/nrp-tool-
kit .
Installing on a computer
1. Start the R&S NRP Toolkit installer on the Windows-based computer.
In the "NRP-Toolkit Setup" dialog, the correct R&S NRP Toolkit version for your
operating system, 32-bit or 64-bit, is already selected.
2. Enable the components you want to install.
● "NRP-Toolkit (SDK)"
The software development kit (SDK) provides programming examples for the
R&S power sensors.
● "IVI Shared Components"
Installs the USBTMC driver. Enabled by default because the installation is rec-
ommended.
See also
Table 7-1 .
R&S NRP Toolkit