Getting Started
R&S
®
NGL200/NGM200
18
User Manual 1178.8736.02 ─ 09
Use only the power cable included in the delivery package. See
on page 19.
Before each measurement, measuring cables must be inspected for damage and
replaced if necessary. Damaged or worn components can damage the instrument or
cause injury.
The instrument may be operated only under the operating conditions and in the posi-
tions specified by the manufacturer, without the product's ventilation being obstructed.
If the manufacturer’s specifications are not observed, this can result in electric shock,
fire and/or serious personal injury, and in some cases, death.
Applicable local or national safety regulations and rules for the prevention of accidents
must be observed in all work performed.
The instrument is designed for use in the following sectors: Industrial, residential, busi-
ness and commercial areas and small businesses.
The instrument is designed for indoor use only. Before each measurement, you need
to verify at a known source if the instrument functions properly.
To disconnect from the mains, unplug the IEC socket on the back panel.
See
for the general data on the instrument specification. For more informa-
tion, see the instrument datasheet (P/N: 5216.1057.32).
Table 4-1: General data on instrument specification
General data
Mains nominal voltage
AC 100 V / 115 V / 230 V (
±
10 %) 50 Hz to 60 Hz
Maximum power consumption
400 W
Mains fuses
2 x IEC T4.0H 250 V
Operating temperature range
+5
°
C to +40
°
C
Storage temperature range
-20
°
C to +70
°
C
Humidity noncondensing
5 % to 95 %
Display
TFT 5
"
800 pixels x 480 pixels WVGA Touch
Rack installation
R&S HZN96 rack adapter 2U (P/N: 3638.7813.02)
Dimensions (W x H x D)
222 mm x 97 mm x 436 mm (8.74
"
x 3.82
"
x 17.17
"
)
Weight
R&S NGL201
R&S NGM201
7.1 kg (15.65 lb)
7.2 kg (15.87 lb)
R&S NGL202
R&S NGM202
7.3 kg (16.09 lb)
7.4 kg (16.31 lb)
Putting into Operation
