Getting Started
R&S
®
OSP
32
User Manual 1178.7100.02 ─ 05
2.3
Trying Out the Switch Unit
This chapter introduces the most important basic operations and settings of the
R&S
OSP step by step. The complete description of the functionality and its usage is
given in
Prerequisite: the instrument is set up, connected to mains power supply and
Manual and Remote Modes of Operation
............................................................... 32
User Interface and Functional Elements
.................................................................34
................................................................................................ 37
..................................................................................... 38
Manual Module Operation: Switching / Selecting
....................................................39
2.3.1
Manual and Remote Modes of Operation
You can operate the switch unit by any of the following modes:
......................................................................................... 32
......................................................................................33
Remote Operation by SCPI Commands
................................................................. 33
2.3.1.1
Direct Manual Operation
If you use an R&S
OSP230 or an R&S
OSP320 with display module R&S
OSP-
B300M, you can control your switch unit by the user interface on the integrated touch-
screen display.
Alternatively, with any of the R&S
OSP models, you can control your switch unit via an
external mouse and keyboard, connected to the USB interfaces (see 4 in
Optionally (especially without integrated touchscreen), you can connect an external
monitor to the switch unit's HDMI interface (see 5).
Figure 2-13: Operation by integrated touchscreen (1) or by external USB / HDMI devices (2)
For scrolling the touchscreen, swipe it with your finger. With an external monitor, click
and use the mouse wheel or the keyboard's up/down keys.
For connecting external devices, see
.
Trying Out the Switch Unit