Getting Started
R&S
®
OSP
39
User Manual 1178.7100.02 ─ 05
2.3.5
Manual Module Operation: Switching / Selecting
This chapter outlines only the most basic features of the dialogs for manual
that allow immediate interaction with
s (relays, output chan-
nels).
Click the "Module Operation" button to see a
list
of all installed switch modules or
to open the
interaction dialog
of one switch module:
Table 2-3: Left overview: list of modules in virtual mode. / Right: interaction dialog of one module in physical mode.
If you see the interaction dialog of one switch module (as in the right picture above),
click the "Module Operation" button to see the list of installed modules (as in the left
picture above, here a screenshot in virtual mode). In the icon of the "Module Opera-
tion" button, the "back" arrow (available with firmware versions from 1.40) indicates
that it brings you back to the list. To see the interaction dialog of any module, click its
name in the list.
2.3.5.1
Switching Mode
The switching mode is active, as long as the
is deactivated. In switch-
ing mode, clicking the icon of a relay or channel changes its state:
Figure 2-19: Various relay types and the effect of clicking them
●
(A)
relays: Clicking toggles the state
●
(C) SP6T relays, and (D) SP8T relays (or
Clicking a terminal port selects it to be connected to the common port
●
(E) Output channels: Clicking toggles the state
Trying Out the Switch Unit