Rohde & Schwarz NRPM OTA Power Measurement Solution, Manual

Page: 155 / 229

Remote control commands
R&S
®
NRPM
155 Mannual 1425.8663.02 ─ 08
Example: [SENSe1:][POWer:][AVG:]BUFFer:CLEar
Usage: Event
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:COUNt?
Available in continuous average mode.
Queries the number of results that are currently saved in the result buffer.
Example: [SENSe1:][POWer:][AVG:]BUFFer:COUNt?
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:DATA?
Queries the data of the continuous average result buffer and returns them even if
the buffer is not full.
In contrast,
FETCh<Channel>[:SCALar][:POWer][:AVG]?
returns a result
only if the buffer is full.
Example: [SENSe1:][POWer:][AVG:]BUFFer:DATA?
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:INFO? [<ITEM>]
Queries the data of the continuous average result buffer.
Query parameters:
<ITEM>
Example: [SENSe1:][POWer:][AVG:]BUFFer:INFO?
Usage: Query only
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE <count>
Sets the size of the result buffer in continuous average mode.
You can enable the buffer using
[SENSe<Sensor>:][POWer:][AVG:
]BUFFer:STATe
.
Configuring the measurement modes