Rohde & Schwarz NRPM OTA Power Measurement Solution, Manual

Page: 11 / 229

Safety and regulatory information
R&S
®
NRPM
11 Mannual 1425.8663.02 ─ 08
●
Identification of the product
See
Chapter 6.3.5.1, "Using hostnames" , on page 55.
●
Sensitive components
Table 1-2
Table 1-1: Labels regarding environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life.
For more information, see
"Disposing electrical and electronic equipment" on page 213.
Table 1-2: Labels regarding sensitive components
Electrostatically sensitive components
Indicates sensitivity to touch. Follow the instructions in the product documentation to
avoid product damage. See "To prevent antenna damage" on page 18.
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to
other property.
Warning messages in the documentation