Trying Out the Instrument
R&S
®
NGE100
21
Getting Started 5601.1308.02 ─ 04
5.3
Activating the Channels Output
The output voltages can be switched on or off irregardless of the operating mode
the instrument is in.
To activate the channel output, press
Output
key on the front panel followed by
the desired channel key or vice versa. The font color of that channel section
changes to green or red depending on the operating mode the instrument is in.
5.4
Storing / Recalling of Instrument Settings
The instrument settings can be stored in the instrument memory by long pressing
Store Recall
key and selecting the memory location (
M1
to
M5
) key. The previ-
ous setting is overwritten.
To retrieve the desired saved settings, press
Store Recall
key and select the
memory location (
M1
to
M5
) key.
Storing / Recalling of Instrument Settings
