Instrument Tour
R&S
®
NGE100
16
Getting Started 5601.1308.02 ─ 04
4 = Output channels (three for NGE103 and two for NGE102)
5 = USB connector
6 = Power key
Display
The display is a color LCD screen. Depending on the instrument type, up to three
channels are shown on the screen. The respective measurement settings and
functions are displayed in the individual channel section. There is a status bar
above the channels to show whether a certain function is enabled, disabled or
operating in a certain mode.
For a detailed description on-screen layout, see section "Screen Layout" in the
User Manual.
Function keys
Function keys are means of input for manual operation of the instrument func-
tions. When a function key is pressed, all the related keys are also illuminated.
For detailed description on function keys, see section "Function Keys" in the User
Manual.
Rotary knob and arrow keys
Rotary knob and arrow keys are means of navigation and adjustment. When
pressed or rotated, they perform tasks like navigation around the screen, adjust-
ment of parameter values or confirmation of entries.
For detailed description on rotary knob and arrow keys, see section "Navigation
Controls" in the User Manual.
Output channels
Depending on the instrument type, up to three output channels are available for
output of power to the connected load. They are Ch 1, Ch 3 and Ch 3 (0 V to 32
V / 0 A to 3 A).
USB connector
The USB connector is a Type-A connector. You can connect a USB flash drive to
this connector to perform a firmware update. See section "Firmware Update" in
the release notes for the update procedure.
Overview of Controls
