Instrument functions
R&S
®
NGP800
59
User Manual 5601.5610.02 ─ 09
Figure 6-15: Tracking dialog
3. Activate the "Enabled" menu item to enable the tracking function.
4. Set the required channels to be tracked.
The R&S
NGP800 tracks the voltage and/or current values to the selected tracked
channels.
6.6
Digital trigger I/O
Digital trigger I/O pins voltage rating
Do not exceed the maximum voltage rating of the digital I/O pins when supplying vol-
tages to the pins.
For more information, see the instrument datasheet (P/N: 3609.1927.32).
Instrument option
R&S NGP-K103 (P/N: 5601.6300.03) option is required for the Digital I/O signals.
The eight data lines of the digital I/O interface are mutually independent and can be
used as trigger input or trigger output separately. See
●
Trigger input
The data lines of the digital I/O interface receive external trigger signal. The exter-
nal trigger signal triggers the selected channel ("Ch 1", "Ch 2", "Ch 3", "Ch 4" or
"All") with the set response when the trigger condition ("Active High" or "Active
Low") is met.
●
Trigger output
Digital trigger I/O
