59
Remote Control
59
Remote Control
9.3.5 Key Brightness (KEY)
The soft menu key KEY BRIGHT allows you to set the key
brightness via knob from 0% to 100%. The soft menu key
FALLB. TIMES allows you to set the so called Key Fallback
Time to 5 s, 10 s or 20 s by pressing the soft menu key KEY.
If the key fallback time is set, the open settings window
will be closed automatically after the adjusted key fallback
time. In addition, it is possible to switch off the automatic
switching back (OFF). The respective soft menu item is
activated when it is marked in yellow.
9.3.6 Device Name
In this menu, you can select an instrument name. Pressing
the soft menu key DEVICE NAME opens a keypad. Use the
knob to select the letters. You can confirm each letter via
ENTER key (SHIFT). Press the soft menu key ACCEPT to
confirm the entered instrument name.
9.3.7 CSV
Use the soft menu CSV to define the format of the CSV
file. The decimal separator (DEC.SEP.) and the line separa-
tor (FIELD DELIM.) can be definedund.
Fig. 9.4: Enter the device name
10 Remote Control
By default, the R&S®HMC804x includes an Ethernet and a
USB interface.
In addition to a LAN interface, the R&S®HMC804x includes
a USB device port. For this interface, the user can select
if the instrument is accessed via virtual COM port (VCP)
or via USB TMC class. The R&S®HMC804x is optionally
available ex factory with an integrated GPIB interface
(R&S®HMC804x-G). The GPIB interface has its own inter-
face slot on the rear panel.
10.1 USB VCP
The traditional version of the VCP (virtual COM port) al-
lows the user to communicate with the R&S®HMC us-
ing any terminal program via SCPI commands once the
corresponding Windows drivers have been installed.
The actual USB-VCP driver can be downloaded from the
ROHDE & SCHWARZ homepage for free. If a connection
between PC and the instrument has been established and
no R&S®HMC USB-VCP driver is installed, the operating
system answers with “Found New Hardware”. In addition,
the “Found New Hardware Wizard” is displayed. Only in
this case the USB-VCP driver must be installed. Further
To enable communication, the selected interface and the respec-
tive settings in the instrument must be identical to the selections
for the PC.
Fig. 10.1: Rear panel
All currently available USB VCP drivers have been fully tested
and released for Windows XP™, VISTA™, Windows 7™, Win-
dows 8™ and Windows 10™ (32 + 64 Bit).
Fig. 10.2: USB-
VCP settings
Summary of Contents for HMC804
Page 35: ...35 Anhang 35 Anhang ...
