Rohde & Schwarz FPL1000 Series, User Manual

Page: 455 / 899

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
455 User Manual 1178.3370.02 ─ 03
Marker peak list
The marker peak list determines the frequencies and levels of peaks in the spectrum. It
is updated automatically after each sweep. How many peaks are displayed can be
defined, as well as the sort order. In addition, the detected peaks can be indicated in
the diagram. The peak list can also be exported to a file for analysis in an external
application.
Remote commands:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe
on page 742
TRAC? LIST
, see
TRACe<n>[:DATA]
on page 703
Peak List State ........................................................................................................... 455
Sort Mode ...................................................................................................................456
Maximum Number of Peaks .......................................................................................456
Peak Excursion .......................................................................................................... 456
Display Marker Numbers ............................................................................................456
Export Peak List ......................................................................................................... 456
Peak List State
Activates/deactivates the marker peak list. If activated, the peak list is displayed and
the peaks are indicated in the trace display.
For each listed peak the frequency/time ( "X-value" ) and level ( "Y-Value" ) values are
given.
Marker Usage