Rohde & Schwarz FPL1000 Series, User Manual

Page: 742 / 899

Remote Commands
R&S
®
FPL1000
742 User Manual 1178.3370.02 ─ 03
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:LIST:SIZE <MaxNoPeaks>
This command defines the maximum number of peaks that the R&S FPL1000 looks for
during a peak search.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<MaxNoPeaks> Maximum number of peaks to be determined.
Range:
1 to 200
*RST: 50
Example: CALC:MARK:FUNC:FPE:LIST:SIZE 10
The marker peak list will contain a maximum of 10 peaks.
Manual operation: See " Maximum Number of Peaks " on page 456
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT <SortMode>
This command selects the order in which the results of a peak search are returned.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<SortMode> X
Sorts the peaks according to increasing position on the x-axis.
Y
Sorts the peaks according to decreasing position on the y-axis.
*RST:
X
Example: CALC:MARK:FUNC:FPE:SORT Y
Sets the sort mode to decreasing y values
Manual operation: See " Sort Mode " on page 456
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe <State>
This command turns a peak search on and off.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Setting Basic Spectrum RF Measurement Parameters