Rohde & Schwarz ESRP Series, User Manual

Page: 845 / 1094

Remote Control
R&S
®
ESRP
842 User Manual 1175.7445.02 ─ 08
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:DELT:FUNC:PNO ON
Switches on the phase-noise measurement with all delta mark-
ers.
CALC:DELT:FUNC:FIX:RPO:X 128 MHZ
Sets the frequency reference to 128 MHz.
CALC:DELT:FUNC:FIX:RPO:Y 30 DBM
Sets the reference level to +30 dBm
Manual operation: See "Phase Noise On/Off" on page 389
Marker Demodulation
Commands useful to configure the marker demodulation described elsewhere:
●
[SENSe:]DEMod:SQUelch:LEVel
on page 617
●
[SENSe:]DEMod:SQUelch[:STATe]
on page 617
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous
....................................842
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLDoff
..........................................842
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
............................................843
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
........................................... 843
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:CONTinuous <State>
This command turns continuous demodulation of the signal at the marker position in
the frequency domain on and off.
Thus acoustic monitoring of the signals can be performed.
In the time domain continuous demodulation is always on.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC2:MARK3:FUNC:DEM:CONT ON
Switches on the continuous ' demodulation.
Manual operation: See "Continuous Demod (span > 0)" on page 391
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLDoff <Duration>
This command defines for how long the the signal at the marker position is demodula-
ted.
Remote Commands in Spectrum Analyzer Mode