Rohde & Schwarz ESRP Series, User Manual

Page: 832 / 1094

Remote Control
R&S
®
ESRP
829 User Manual 1175.7445.02 ─ 08
CALCulate<n>:TLINe<Line> <Time>
This command defines the position of a time line.
Suffix:
<n>
.
irrelevant
<Line> 1 | 2
Selects the time line.
Parameters:
<Time> Range: 0 to 30000000000
*RST: (STATe to OFF)
Default unit: s
Example:
CALC:TLIN 10ms
Manual operation: See "Time Line 1 / Time Line 2" on page 189
CALCulate<n>:TLINe<Line>:STATe <State>
This command turns a time line on and off.
Suffix:
<n>
.
irrelevant
<Line> 1 | 2
Selects the time line.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:TLIN2:STAT ON
Manual operation: See "Time Line 1 / Time Line 2" on page 189
Using Limit Lines
For commands that control limit lines see Chapter 11.4.8.3, "Using Limit Lines" ,
on page 674.
11.5.3.4 Markers
● Using Markers .......................................................................................................829
● Using Delta Markers ..............................................................................................834
● Controlling Fixed Reference Markers ....................................................................835
● Using Marker Functions ........................................................................................ 837
Using Markers
Commands useful to control markers described elsewhere:
●
CALCulate<n>:MARKer<m>:AOFF
on page 660
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer
on page 656
Remote Commands in Spectrum Analyzer Mode