Rohde & Schwarz ESRP Series, User Manual

Page: 838 / 1094

Remote Control
R&S
®
ESRP
835 User Manual 1175.7445.02 ─ 08
●
CALCulate<n>:DELTamarker<m>:X:RELative?
on page 671
●
CALCulate<n>:DELTamarker<m>:Y
on page 671
CALCulate<n>:DELTamarker<m>:MREF
.......................................................................... 835
CALCulate<n>:DELTamarker<m>:MREF <RefMarkerNo>
This command defines the reference marker for a delta marker other than marker 1.
The reference may be another marker or the fixed reference.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Parameters:
<RefMarkerNo> 1 ... 16
Selects markers 1 to 16 as the reference.
FIXed
Selects the fixed reference as the reference.
Example: CALC:DELT3:MREF 2
Specifies that the values of delta marker 3 are relative to marker
2.
Manual operation: See "Marker Wizard" on page 178
Controlling Fixed Reference Markers
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
.....................835
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:X
............................................. 836
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y
............................................. 836
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:Y:OFFSet
................................. 836
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed[:STATe]
............................................... 837
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
This command moves the fixed reference marker to the peak power.
When measuring the phase noise, the command defines a new reference point level
for delta marker 2.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Example: CALC:DELT:FUNC:FIX:RPO:MAX
Sets the reference point level for delta markers to the peak of
the selected trace.
Usage: Event
Manual operation: See "Peak Search" on page 389
Remote Commands in Spectrum Analyzer Mode