Remote Control
R&S
®
ESRP
629
User Manual 1175.7445.02 ─ 08
<m>
1...16
Selects the marker.
Parameters:
<SearchArea>
VISible
Performs a search in the visible frames.
Note that VISible is ignored if Spectrogram is not visible for any
reason (e.g. if the Spectrum Analyzer is in full screen mode or
display update is inactive).
MEMory
Performs a search over all frames in the memory.
*RST:
VISible
Example:
CALC:DELT:SGR:SAR MEM
Performs a search over all frames in the memory.
CALCulate<n>:DELTamarker<m>:SGRam:XY:MAXimum[:PEAK]
This command positions the specified delta marker on the current peak level of the
spectrogram. The possible position depends on the deltamarker search area.
The command is available for the spectrogram.
For more information, see
CALCulate<n>:DELTamarker<m>:SGRam:SARea
Suffix:
<n>
.
1...4
Selects the measurement window.
<m>
1...16
Selects the marker.
Example:
CALC:DELT2:SGR:SAR VIS
CALC:DELT2:SGR:XY:MAX
Activates and positions delta marker 2 on the peak level in the
visible Spectrogram.
Usage:
Event
CALCulate<n>:DELTamarker<m>:SGRam:XY:MINimum[:PEAK]
This command positions the specified delta marker on the current minimum level of the
spectrogram. The possible position depends on the deltamarker search area.
The command is available for the spectrogram.
For more information, see
CALCulate<n>:DELTamarker<m>:SGRam:SARea
Suffix:
<n>
.
1...4
Selects the measurement window.
Remote Commands in Receiver Mode
