Rohde & Schwarz EK 895, Operator'S Manual

Page: 21 / 77

V L F
>
H F R E C E I V E R S
f
E K 8 9 5 / E K 8 9 6
Operator Manual
f
Software
1.1
.
4 Software
(see Fig. 1.4 for EK 895 or Fig. 1.5 for EK ! 896)
The software offers various individual menus
which are arranged on different levels (1 to 6).
By softkey actuation, the operator moves from
the highest to the lowest level. In order to
move from a lower to the next higher level,
only the key MENU must be pressed.
On the first level there are the following
menus:
EK 895 EK 896
f Main menu f Main menu *
The actuation of key MORE or one of the soft
>
keys calls up the second level.
On the second level there are the following
menus:
EK 895 EK 896
f Main menu 2 f Mod. mode menu 2*
1)
f Mod. mode menu
1)
f Mod. mode menu 3*
1)
f Mod. mode menu 2
1)
f Mod. mode menu 4*
1)
f Mod. mode menu 3
1)
f Mod. mode menu 5 *
f Mod. mode menu 4
1)
f Channel editor menu *
f Mod. mode menu 5 f Storage menu
f Control type menu
1)
f System functions menu *
f Control time menu
1)
f Special functions menu
f Bandwidth selection f Scanning menu 1)
menu 1)
f
Scanning menu 1)
The actuation of one of the softkeys calls up
the third level.
The first level is automatically reached again by
pressing key MENU.
On the third level there are the following
menus:
EK 895 EK 896
f Demodulation parameter f Demodulation parameter
menu
1)
menu
1)
f Programming menu
1)
f Programming menu
1)
f
Master / slave menu 1)
f
CHM:
f System functions menu
>
Mod. mode menu 2 *
1)
f Special functions menu
>
Mod. mode menu 3 *
1)
f Channel editor menu
>
Mod. mode menu 4 *
1)
f Storage menu
>
Mod. mode menu 5 *
f System functions menu 2
f Signal BYPASS menu
f IF menu
f Tuning knob menu
f Level line menu
f LOCAL / REMOTE menu
f
Default value menu 1)
The actuation of one of the softkeys calls up
the fourth level.
The first level is automatically reached again by
pressing key MENU twice.
On the fourth level there are the following
menus:
EK 895 EK 896
f Freq. deviation menu
1)
f Freq. deviation menu
1)
f Baud rate menu
1)
f Baud rate menu
1)
f TTY status menu
1)
f TTY status menu
1)
f System functions menu 2 f LOC / fixed
>
channel menu
f Signal BYPASS menu f Control type menu
f IF menu f Frequency type menu
f Tuning knob menu f CHM:
f Level line menu
>
Demodulation
f
LOCAL / REMOTE menu parameter menu 1)
f Default value menu
1)
f CHM:
>
Modulation mode menu
1)
>
Modulation mode menu 2
1)
>
Modulation mode menu 3
1)
>
Modulation mode menu 4
1)
>
Modulation mode menu 5
>
Control type menu
1)
>
Control time menu
1)
>
Bandwidth selection menu 1)
The actuation of one of the softkeys calls up
the fifth level.
The first level is automatically reached again by
pressing key MENU three times.
6075.6991.82.01
>
1.5
>