GUI Reference
R&S
®
CMW-KM750/-KM751
39
User Manual 1173.9670.02 ─ 05
SICH Code Number
Channelization code number of the shared information channel (HS-SICH). The spread-
ing factor of the HS-SICH equals 16. The resulting channelization code is c
16,<Index>
. As
a result of this setting the channel with this code number is labeled as "SICH" in the Code
Domain Error and Code Domain Power result presentations.
Remote command:
Channel Info Mode
Channel information mode "Manual" or "Auto". In "Auto" mode the instrument determines
the DPCH configuration automatically (e.g. spreading factors and channelization code
numbers). In "Manual" mode these parameters have to be entered manually (see "DPCH"
in this dialog). The "Manual" mode is faster but requires correct "DPCH" settings. It can
only be set when SICH Enable is "Off".
Remote command:
DPCH
Dedicated physical channel (DPCH) settings. This entry is only available for Channel Info
Mode=Manual. The spreading factors and channelization code numbers of all active
channels must be compatible. Each code number can only be assigned to one channel.
The spreading factor settings must comply to 3GPP TS 25.223, see also
For administration it may be required to deactivate channels temporarily. Activation of a
channel with inconsistent settings is rejected.
Remote command:
4.2.3 Measurement Control Settings
The "Measurement Control" parameters configure the scope of the TD-SCDMA multi
evaluation measurement.
See also: "Statistical Settings" in the R&S CMW user manual, chapter "System Overview"
Parameters and Settings
