Command Reference
R&S
®
CMW-KM750/-KM751
70
User Manual 1173.9670.02 ─ 05
CONFigure:TDSCdma:MEAS<i>:UESignal:SFACtor
<DPCHSF>(16)
Selects the spreading factors of all channels. The spreading factors assigned to the active
channels must always be consistent. It may be required to disable channels temporarily
for administration.
Parameters:
<DPCHSF>
SF1 | SF2 | SF4 | SF8 | SF16
16 values for channel 1 to channel 16
SF1 ... SF16
: spreading factor = 1, 2, 4, 8, 16
*RST:
SF16, SF16, ... (16 times SF16)
Example:
See
Firmware/Software:
V1.0.4.11
Manual operation:
See
CONFigure:TDSCdma:MEAS<i>:UESignal:SFACtor:DPCH<chidx>
<DPCHSFIdx>
Selects the spreading factor of the channel with the indicated <chidx>. The spreading
factors assigned to the active channels must always be consistent. It may be required to
disable channels temporarily for administration.
Suffix:
<chidx>
.
1..16
number of the DPCH
Parameters:
<DPCHSFIdx>
SF1 | SF2 | SF4 | SF8 | SF16
Spreading factor 1, 2, 4, 8, 16
*RST:
SF16
Example:
See
Firmware/Software:
V1.0.4.11
Manual operation:
See
CONFigure:TDSCdma:MEAS<i>:UESignal:CNUMber
<DPCHCodeNum>(16)
Selects the channelization code numbers of all dedicated physical channels. The result-
ing channelization code of a channel is c
SF,<DPCHCodeNum>
where SF indicates the spread-
ing factor of the channel.
The code numbers and spreading factors assigned to active channels must always be
compatible. It may be required to disable channels temporarily for administration. For
compatibility of settings see
chapter 3.4.2, "Channelization for CDMA"
General Measurement Settings
