Command Reference
R&S
®
CMW-KM750/-KM751
71
User Manual 1173.9670.02 ─ 05
Parameters:
<DPCHCodeNum>
16 values for channel 1 to channel 16
Range:
0 to SF-1 (where SF is the spreading factor of the
channel)
*RST:
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Example:
See
Firmware/Software:
V1.0.4.11
Manual operation:
See
CONFigure:TDSCdma:MEAS<i>:UESignal:CNUMber:DPCH<chidx>
<DPCHCodeNumIdx>
Selects the channelization code number of the dedicated physical channel with the indi-
cated <chidx>. The resulting channelization code of the channel is c
SF,<DPCHCodeNumIdx>
where SF indicates the spreading factor of the channel. The code numbers and spreading
factors assigned to active channels must always be consistent. It may be required to
disable channels temporarily for administration.
For compatibility of settings see
chapter 3.4.2, "Channelization for CDMA"
Suffix:
<chidx>
.
1..16
number of the DPCH
Parameters:
<DPCHCodeNumIdx>Range:
0 to SF-1 (where SF is the spreading factor of the
channel)
*RST:
<chidx>-1
Example:
See
Firmware/Software:
V1.0.4.11
Manual operation:
See
CONFigure:TDSCdma:MEAS<i>:UESignal:ECHannel
<DPCH>
Selects or deselects all dedicated physical channels of the uplink. The selection of chan-
nels with incompatible settings (spreading factor and channelization code number) is
rejected. For compatibility of settings see
chapter 3.4.2, "Channelization for CDMA"
Setting parameters:
<DPCH>
OFF | ON
OFF
: deselect all channels
ON
: select all channels
*RST:
n/a
General Measurement Settings
