GUI Reference
R&S
®
CMW-B400B/-B405A
29
User Manual 1176.8116.02 ─ 04
Lower Part
The lower half of the tab displays information provided by the coupled master applica-
tion. Which information is displayed, depends on the selected application.
The information is also available in the GUI of the master application and is described
in the corresponding documentation.
4.2 Measurement and Generator Control
For each audio measurement and audio generator there is a softkey. The presence of
the softkeys depends on the tab currently selected in the main view.
To turn an audio generator on or off, select the generator softkey and press ON | OFF
on the (soft-)frontpanel.
To turn an audio measurement on or off, select the measurement softkey and press
ON | OFF or RESTART | STOP on the (soft-)frontpanel.
Analog Generator / Digital Generator (Softkeys)
Both softkeys are visible if an audio measurement tab is selected (analog or digital).
They show the current states of the generators.
Remote command:
SOURce:AUDio:GEN<i>:ANALog:STATe
SOURce:AUDio:GEN<i>:DIGital:STATe
Analog Meas (Softkey)
This softkey is only visible if the analog audio measurement tab is selected.
The softkey shows the current state of the analog audio measurement. Additional mea-
surement substates may be retrieved via remote control.
Remote command:
INITiate:AUDio:MEAS<i>:ANALog
ABORt:AUDio:MEAS<i>:ANALog
STOP:AUDio:MEAS<i>:ANALog
FETCh:AUDio:MEAS<i>:ANALog:STATe?
FETCh:AUDio:MEAS<i>:ANALog:STATe:ALL?
Digital Meas (Softkey)
Measurement and Generator Control
135-1095-0799
