Rohde & Schwarz AREG100A User Manual Download Page 236

Page: 236 / 321

Remote Control Commands

R&S

AREG100A

236

User Manual 1178.7417.02 ─ 04

To query the list of data sheet versions, use the command

:SYSTem:

SPECification:VERSion:CATalog?

on page 236.

Parameters:

string

Example:

See

:SYSTem:SPECification?

on page 234.

:SYSTem:SPECification:IDENtification:CATalog?

Queries the parameter identifiers (

<Id>

) available in the data sheet.

Return values:

string
Comma-separated string of the parameter identifiers (

<Id>

)

Example:

See

:SYSTem:SPECification?

on page 234.

Usage:

Query only

:SYSTem:SPECification:PARameter?

<Id>[, <Parameter>]

Retrieves data sheet information for a specific parameter.

Setting parameters:

<Id>

string
Identifies the name of the entry in the data sheet.
Query the data sheet parameters with the command

:SYSTem:

SPECification:IDENtification:CATalog?

float
An additional value the result (

ValList

) depends on.

Return values:

float
Comma-separated list with the specified and, if available, the
typical value of the parameter, as specified in the data sheet.

Example:

Note:

The following values are merely an example. Your instru-

ment may not support the same parameters.

SYST:SPEC:PAR? "ID_RF_FREQ_SETTING_TIME_MS",0.1
SYST:SPEC:PAR? "ID_RF_LEVEL_MAX_GENERAL_DBM",
0.1

Usage:

Query only

:SYSTem:SPECification:VERSion:CATalog?

Queries all data sheet versions stored in the instrument.

Return values:

string

SYSTem Subsystem

Summary of Contents for AREG100A


































































































































































































































































































































Search results

Summary of Contents for AREG100A

Reviews:

Rohde & Schwarz AREG100A, User Manual, Page: 236 / 321

Search results

Summary of Contents for AREG100A

Reviews: