Rohde & Schwarz AREG100A, User Manual, Page: 234 / 321

Remote Control Commands
R&S
®
AREG100A
234 User Manual 1178.7417.02 ─ 04
:SYSTem:LANGuage <Language>
Sets the remote control command set.
Parameters:
<Language> string
Example:
SYSTem:LANGuage "SCPI"
// selects SCPI command set
Manual operation: See "Language" on page 145
:SYSTem:INFormation:SCPI <InfoString>
Inserts system information in recorded SCPI command lists, for example information
on a missing command.
Parameters:
<InfoString> string
Example: SYST:INF:SCPI "missing command"
enters the information into a recorded SCPI command list.
:SYSTem:SECurity:SANitize[:STATe] <SecPassWord>, <MmemProtState>
Sanitizes the internal memory.
Parameters:
<MmemProtState> 0 | 1 | OFF | ON
*RST:
0
Setting parameters:
<SecPassWord> string
Example:
SYSTem:SECurity:SANitize[:STATe] 1
Manual operation: See "Sanitize" on page 119
:SYSTem:SECurity:SUPolicy <SecPassWord>, <Update Policy>
Configures the automatic signature verification for firmware installation.
Parameters:
<Update Policy> STRict | CONFirm | IGNore
*RST:
n.a. (factory preset: CONFirm)
Setting parameters:
<SecPassWord> string
Manual operation: See "Secure Update Policy" on page 117
:SYSTem:SPECification? <Id>
Retrieves data sheet information for a specific parameter.
SYSTem Subsystem