Rohde & Schwarz AREG100A, User Manual, Page: 205 / 321

Remote Control Commands
R&S
®
AREG100A
205 User Manual 1178.7417.02 ─ 04
:HCOPy:REGion <Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST:
ALL
Example: See Example "Store a hard copy of the display" on page 203
Manual operation: See "Region" on page 98
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 9.7.2, "Automatic Naming" , on page 205.
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 203
Manual operation: See "File..." on page 97
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example: See Example "Store a hard copy of the display" on page 203
Usage: Event
Manual operation: See "Save" on page 98
9.7.2 Automatic Naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?
.........................................................................................206
:HCOPy:FILE[:NAME]:AUTO:DIRectory
........................................................................... 206
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
................................................................. 206
:HCOPy:FILE[:NAME]:AUTO:FILE?
................................................................................. 206
:HCOPy:FILE[:NAME]:AUTO:STATe
.................................................................................207
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe
................................................................207
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe
...........................................................207
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe
............................................................. 207
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
.................................................................. 207
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix
..................................................................... 208
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe
........................................................... 208
HCOPy Subsystem