Rohde & Schwarz AREG100A, User Manual, Page: 207 / 321

Remote Control Commands
R&S
®
AREG100A
207 User Manual 1178.7417.02 ─ 04
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates automatic naming of the hard copy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Store a hard copy of the display" on page 203
Manual operation: See "Automatic Naming" on page 98
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe <State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
Uses the date parameters (year, month or day) for the automatic naming. You can acti-
vate each of the date parameters separately.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Store a hard copy of the display" on page 203
Manual operation: See "Prefix, Year, Month, Day" on page 99
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number that is used as part of the file name for the next hard copy in auto-
matic mode.
At the beginning, the count starts at 0. The R&S AREG100A searches the specified
output directory for the highest number in the stored files. It increases this number by
one to achieve a unique name for the new file.
The resulting auto number is appended to the resulting file name with at least three
digits.
Return values:
<Number> integer
Range:
0 to 999999
*RST: 0
Example: See Example "Store a hard copy of the display" on page 203
Usage: Query only
Manual operation: See "Current Auto Number" on page 100
HCOPy Subsystem