Rohde & Schwarz 6144.7800.02, Operating Manual

Page: 75 / 189

R&S EU4200C Local Control (Local Mode)
6174.8456.02-01 3.32
3.4.3.3 Standard Operating Display
Standard operating d isplay \Standard operating di splay "Radio ".doc
Display parameter
During an operation the LCD indicates the most important settings and
status messages.
R&S EU4200C
example
E U 4 2 0 0 C 2 1 : 0 4 : 1 3
M U E N C H E N 4 R A C K 1 R A D 1 7
1 2 4 6 7 5
A M
.
L O C I N A C T
S C
S Q
C B I T S T A T U S : W A R N I N G
4 0 2 A C M A I N W
Fig. 3.12 Standard operating display.
Line Display text Description
1 EU4200C
21:04:13 Device type: VHF Compact receiver
Display: time of day
2 MUENCHEN4 RACK1 RAD17 Location information, optional text. It can be entered
via USB service PC (see chapter 3.3). Only the first
line is displayed.
3 + 4 124.675
AM Frequency in ICAO format. Example shows frequency
value with 25 kHz spacing
AM/ACARS modes
Note:
Frequency can be entered by pressing any
numeric key. Then, the MMI opens the Frequency
submenu automatically.
5 + 6 LOC
INACT
SC
SQ Local control mode
Radio in inactive state (standby). For example, radio
was switched to inactive via remote control command.
Single channel configuration has been configured via
USB.
Squelch Button indication. The SQ state will be stored
after the reboot.
7 + 8 CBIT STATUS: WARNING
402 AC MAIN W CBIT status line. In normal case “OK” is indicated.
Otherwise, warning or error is indicated (if at least one
notice is present).
If there are more notices, they are displayed in
sequence.
Note:
The “W” at the end of a message means that
this is a warning. Generally there are two types of
displayed CBIT messages:
“W” for warning
“E” for error