Configuring the R&S TSMA6
R&S
®
TSMA6
43
Getting Started 4900.8040.02 ─ 09
6.2.1.5
SmartONE mode
The SmartONE modes are only displayed if SmartONE software is installed
(see
R&S TSMA6 user manual
).
To use the R&S TSMA6 with R&S
SmartONE, the following steps must be per-
formed.
1. In the web GUI, set the "Mode of Operation" to one of the following SmartONE
modes and press "Submit".
● "SmartONE Standard"
Activating this mode, a web-based UI with the SmartBenchmarker applica-
tion software, designed for efficient data collection and remote control sup-
port in combination with SmartMonitor can be used.
● "SmartONE Expert"
Activating this mode, an expert UI with the ROMES4 application software
for complex measurement tasks and detailed data investigation during the
measurement can be used.
For the initial settings after installation, see
R&S TSMA6 user manual
.
● "Smart Monitor"
Activating this mode, a central, web-based module for controlling and mon-
itoring a fleet of QualiPoc android probes can be used.
2. Configure the additional settings for "SmartONE Expert" mode only.
Selecting mode of operation
