Preparing for use
R&S
®
TSMA6
23
Getting Started 4900.8040.02 ─ 09
1. Connect the R&S TSMA6 LAN connector with an RJ45 cable to the LAN.
2. Configure the LAN port settings on the R&S TSMA6 via web-GUI in accord-
ance with your administrator guidelines. The IP address setting is shown in
the web-GUI (see
Chapter 6.1.1.1, "Local use of the web GUI"
The default IP setting is "DHCP" (configure IP address automatically).
3. Start a web browser on the remote device and enter the following URL:
http://TSMA6-<xxxxxx>.local
(xxxxxx is the serial number of this specific R&S
TSMA6) or use the IP displayed from the local web-GUI.
Alternatively, use the assigned IP address for remote access (see web-GUI:
"Home" > "IP Settings".
The configuration web GUI of the R&S TSMA6 is started.
4.8
Connecting USB to LAN adapter TSPC-U2L2 /
TSPC-USL
Currently, the following LAN adapters are available.
●
Dual Gbit LAN port adapter TSPC-U2L2
●
Single Gbit LAN port adapter TSPC-U2L
For information how to connect an additional adapter and required driver updates,
see
https://www.rohde-schwarz.com/driver/tsma6/
For the connection of an external LAN adapter, the installation of the related
drivers is mandatory.
4.9
Connecting test mobile phones
When you connect a test mobile phone to a USB port for the first time, the instal-
lation of the appropriate drivers is mandatory.
Currently following driver is available.
●
Samsung USB driver
Connecting test mobile phones
