DVB-H User Interface
DVB-H
41
Operating Manual 1008.0970.12 ─ 16
Marker x Delay
Enters the delay between the marker signal at the marker outputs and the start of the
frame or slot.
The input is expressed as a number of samples. If the setting "Fix marker delay to
dynamic range" is enabled, the setting range is restricted to the dynamic range. In this
range the delay of the marker signals can be set without restarting the marker and sig-
nal.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:DELay
Current Range without Recalculation
Displays the dynamic range within which the delay of the marker signals can be set
without restarting the marker and signal.
The delay can be defined by moving the setting mark.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:DELay:MINimum?
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut<ch>:DELay:MAXimum?
Fix marker delay to current range
Restricts the marker delay setting range to the dynamic range. In this range the delay
can be set without restarting the marker and signal.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:OUTPut:DELay:FIXed
3.5.4 Clock Settings
The clock settings are used to set the clock source and a delay if required.
Sync. Mode
(for R&S SMBV only)
Selects the synchronization mode.
This parameter is used to enable generation of very precise synchronous signal of sev-
eral connected R&S SMBVs.
Note:
If several instruments are connected, the connecting cables from the master
instrument to the slave one and between each two consecutive slave instruments must
have the same length and type.
Avoid unnecessary cable length and branching points.
"None"
The instrument is working in stand-alone mode.
"Sync. Master" The instrument provides all connected instrument with its synchroni-
sation (including the trigger signal) and reference clock signal.
Trigger/Marker/Clock Settings
Summary of Contents for 1402.9557.02
Page 8: ...Preface DVB H 8 Operating Manual 1008 0970 12 16 Conventions Used in the Documentation ...
Page 44: ...DVB H User Interface DVB H 44 Operating Manual 1008 0970 12 16 Trigger Marker Clock Settings ...
Page 76: ...Remote control commands DVB H 76 Operating Manual 1008 0970 12 16 TPS Settings ...